Hardware
Frequency Synthesizer
• 100 Hz to 10MHz
|
Gain
• 0 to 100 dB in 0.5 dB steps |
Filtering
• Variable band pass, low pass, and high pass filtering in the X and Y - axis |
Probe Drive
• 7.5 V P-P with an output impedance of 10 ohm, 200 Milliampere drive, slew rate 2000 V/μS |
Probe Configuration
• Absolute, differential, reflection and differential reflection
|
Analog Outputs
• 15 bit X&Y digital to analog conversion. ＋or－12 volts output |
Sensitivity
• 60 Volt/ohm
|
Power Requirements
• 120 Volt AC |
Computer Requirements
The recomended US-500 system comes with a built in computer that includes a minium of :
• Pentium or better
• 16 MB RAM
• 200MB Hard drive
•ECP Parallel port
•Windows 98 |
Software
Filtering
• Variable band pass, low pass, and high pass filtering selectable from 0 to10,000 Hz |
|
Rotation
• Continuously variable 0-360 degree |
Automatis Lift-Off Adjust
• Automatically nulls and adjusts lift-off
|
Strip Chart Recorder
• Simulated strip chart resorder showing X-Y data |
Auto clear
• 0-10 seconds adjustable in 1second steps
|
Data presentation
• X-Y (rectangular coordinates)
• R-θ(polar coofinates) |
Alarm
• Box, Circle, X-Y only (computer buzzer will be activated for alarm conditions) |
Test Setup Storage
• Storage of complete instrument settings (limited only by hard drive.) |
Data Storage
• 30 seconds minium of strip shart data stored to disc.(limited by hard drive) |
Screen Storage
• Srorage og impedanse plane display including 4 overlays (limited by hard drive) |
Conductivity
• In % IACS |
Thickness
• Both conductive and non-conductive coatings |
|
Conductivity Measurement 
