Control Features
• Continuously variable control knob for selecting instrument settings
• Scrolling menu
Programmable push button function keys
|
Display
• 6.5" diagonal color LCA, flat panel
• Selectable X/Y impedance plane display, O-scape(sweep)
•Selectable disply mode including strip chart,eddy current and external video.
• Choose between 1,2 or all 3 simultaneously.
• Sensitivity scaling of 0.2, 0.5, 1.0,2.0,5.0 volts per division
• O-scape sweep speed of 10 ms/div to 1ms/div
• Auto clear of 0-10 seconds in 1-second increments
• Variable persistence of 0-10 seconds
• Null point can be adjusted for opearator convenience
• Rotation(phase) is 0-359 degrees in 1-degree increments
|
Frequency
• Range from 10Hz to 10MHzm 7.0V p-p with an output impedance of 10 ohm
• Dual frequency modes : F1 & F2, F1＋F2, F1-F2 |
Gain
• 0-99.9dB in 0.1 dB in 0.1 dB steps
Adjustable probe drive |
Filters
• Low and high pass seletable from 0 to 10 kHz in 1 Hz increments |
Probe Types
• Absolute, differential, reflection and differential reflection |
Data Storage
• Programmable test setups : Store up to 100test setups.
• Data storage : Internal memory can store up to 10 data sets.
• Removable memory card includes eddy current display and settings. |
Gate/Alrm
• Rectangular,elliptical, high and low bar wit audio and voltage outputs |
|
Documentation
• Printers include Hewleft Packard via the parallel port
• Printouts include selected menus and headers |
Input/Output data
• RS-232 serial port for remote conrol
• Analog : 16bit A/D and D/A conversion @±10V
• NTSC video in and RGB video out
• Probe connection via an 8 pin Burndy
• Scanner connection via a 16 pin Fisher |
Power
• Lithium ion rechrgeable battery pack, 10.8 volts, 5400m Ah
• Universal power supply and power for operation and battery recharge
• Battery level indicated by LED's on battery |
General
• Case : Uniframe design, over molded grips, dreip and dust proof
• Dimensions: 11.5" long ×7.5"high ×3" deep
• Weight : 5lbs with battery, 4 lbs without
• Operating temperature : -4 to 158 F( -20-70C) |
Operational features
• Video disply has RGB output and NTSC video capture input.
• Eddy current impedance plane, video image and X-Y stip chart recording displayed simultaneously or independently on color LCD display.
• Scanner operation uses separate connector with power supply, including synchronized input to maintain constant rotation.
• Readout of null value can be displayed, indicaring balance betwen coils in probe. |
Accessories
• Remote Smart Battery charger holds 2 batteries, recharging in sequence.
• JF-15 high speed scanner for hand held scanning of bolt holes.
• Rugged storage and shiping container
VisionProbe for viewing inspection areas that cannot be seen visually.
• Standard and special application prodes |
|
와전류는 물론, 스트립 차트 그리고 비디오 검사까지 하나의 장비로 해결할 수 있도록 
