Hardware
Frequency Synthesizer
• 100 Hz to 10MH z direct digital synthesis |
Gain
• 0 to 100 dB in 0.5 dB steps |
Filtering
• Variable band pass, low pass and high pass filtering in the X and Y axis |
Probe Drive
• 7.85 V P-P with an output impedance of 10 ohm, 200 mA drive, slew rate 2000 V/μS |
Probe Configuration
• Absolute, differential,
reflection and differential reflection |
Analog Outputs
• 15bit X&Y digital to analog conversion ±12 Volt output with 610 micro Volt steps |
Sensitivity
• 80 Volt/ohm sensitivity
|
Power Requirements
• 120 Volt AC,12 Volt battery |
Software
Filtering
• Variable band pass, low pass and high pass filtering selectable from 0 to 3200 Hz
Rotation
• Continuously variable 0-360 degree |
Eletronic null
• Under 2 seconds |
Automatis Lift-Off Adjust
• Automatically nulls and adjusts lift-off |
Strip Chart Recorder
• Display of simulated strip chart recoder showing X &Y data |
Auto clear
• 0-10 seconds auto clear adjustable in second steps |
|
Data presentation
• X-Y rectangular coordinates
• R-θ(polar coofinates) |
Probe Configuration
• Box, circle(computer buzzer will be activated for alarm conditions.)
|
Test Setup Storage
• Storage of up to 200 complate setups og the instrument settings |
Data Storage
• 30 minutes or more depending upon interval, memory anf configuration
|
Screen Storage
• 10 complete screen storage with overlay capability |
Screen Storage
• 10 complete screen storage with overlay capavility |
X-Y sensitivity Volt/Division
• 0,.2,.5,1,2&% |
conductivity
• In % IACS |
Thickness
• Both conductive and nonconductive coatings |
Computer Requirements
• 486 DX, 66MHz or greater
• 16 MB Ram
• 200MB Hard Drive
• Local bus video
• Windows
• ECP parallel port |
Accessories
• Probes
• Bolt Hole Scanners
• ETC-200 Eddy Current Scanner System |
|
