Ultrasonic Array |
Centre frequency |
2 - 20 MHz |
Bandwidth |
65% (-6 dB) |
Sensitivity |
Dependant on the pulse duration that can be accepted |
Element pitch |
0.4 mm - 2 mm (typical) |
Max. array width |
10 mm - 75 mm (wider widths on request) |
No. of elements |
Up to 128 (dependant on array width) |
| Aperture |
8,16,24 and 32 channel beam formation supported |
Wheel probe |
Array coupling |
Water filled flexible rubber tyre |
Tyre |
Proprietary low attenuation rubber, impedance matched to water |
Encoder |
Rotary encoder for position information |
Wheel mounting |
Scanning trolley supplied as standard, custom wheel probe mountings available on request |
Pulser |
Pulser type |
Negative square wave, -70 V |
Max pulse repetition frequency |
30 kHz |
Receiver |
System bandwidth |
1 MHz to 22 MHz |
Receiver gain |
-10 dB - 70 dB |
TCG |
No. of definable points: 1024,Amplitude resolution: 0.3 dB
Time resolution: 12.5 ns,Total correction: 80dB,Slope range: 0 - 40 dB/μs |
Digitiser |
Rate |
100 MHz |
Dynamic range |
8 bits |
Analogue bandwidth |
170 MHz |
Processing electronics |
Processor |
AMD 2.4 GHz (typical) |
Hard drive |
40 GB (typical) |
Interfaces |
10/100 baseT Ethernet |
User interface |
Display |
15" TFT 1024x768 Colour LCD, Head up display (optional) |
Application software |
Display modes |
Realtime A-scan, B-scan and C-scan
Simultaneous scan A, B, C-scan display mode (multimode)
Fullwaveform capture permits adjustment of gates etc without need for re-scanning |
A-scan |
High sensitivity paintbrush mode |
B-scan |
High frame rate B-scan display with pan and zoom modes |
C-scan |
20 user defineable gates
Scan resolution: array dependant - typically 0.4 mm- 0.8 mm
Scan speed: 165 mm/s (56 channels, 2 gates, 1000 A-scan points) |
General |
Power supply |
Voltage: 250 V/ 60 Hz or 115 V / 50 Hz
Current 1.5 A / 3.0 A |
Dimensions |
302 x 275 x 422mm (W x H x D) |
Weight |
17 kg |
